SDKManager Fails Looking for Nonexistent Etcher Package

Issue Overview

Users are experiencing issues with the Nvidia Jetson Orin Nano Dev board when attempting to use the SDKManager version 2.1.0.11682 to flash Jetpack 6.0 rev 2 and Deepstream. The primary symptoms include:

• The SDKManager runs nearly to completion but fails at the end, displaying errors related to missing repositories.
• Specific error messages indicate that the URL https://dl.bintray.com/etcher/debian returns a 404 error, and the repository https://deb.etcher.io lacks a release file.
• Users report that the installation fails due to dependency issues linked to the nonexistent Etcher package.

This problem occurs during the setup process when users try to install Jetpack on their Jetson Orin Nano Devkit. The issue appears to be consistent, as multiple users have reported similar experiences after upgrading SDKManager.

The impact on user experience is significant, as it prevents users from successfully flashing their devices, which is critical for development and deployment tasks.

Possible Causes

Several potential causes for this issue have been identified:

• Hardware Incompatibilities or Defects: While no specific hardware issues were reported, it’s essential to ensure that all components are functioning correctly.

• Software Bugs or Conflicts: The upgrade to SDKManager version 2.1.0.11682 may have introduced bugs or conflicts with existing configurations.

• Configuration Errors: The presence of outdated or incorrect repository entries in the system’s configuration files can lead to these errors.

• Driver Issues: If drivers are not up-to-date or compatible with the new SDKManager version, this could cause installation failures.

• Environmental Factors: Network issues or restrictions may prevent access to required repositories.

• User Errors or Misconfigurations: Users may have inadvertently added outdated repositories that SDKManager attempts to access.

Troubleshooting Steps, Solutions & Fixes

To resolve the issue, users can follow these troubleshooting steps:

1. Check Repository Configuration:

   • Open a terminal and inspect your repository list:

     cat /etc/apt/sources.list.d/*
     

   • Look for any entries related to Etcher (e.g., deb https://deb.etcher.io stable main) and remove them if found:

     sudo rm /etc/apt/sources.list.d/etcher.list
     

2. Update Package List:

   • After removing any problematic entries, update your package list:

     sudo apt update
     

3. Retry SDKManager:

   • Launch SDKManager again and attempt the installation process, ensuring you select "Download only" if you want to bypass installation temporarily.

4. Run Diagnostic Commands:

   • Check for any APT-related issues by running:

     sudo apt-get upgrade
     

   • This command should execute without errors if your repositories are correctly configured.

5. Check for Software Updates:

   • Ensure that your Ubuntu system is up-to-date with all necessary dependencies and packages.

6. Consult Logs for Further Information:

   • If issues persist, review the SDKManager logs for detailed error messages that may provide further insight into what is failing.

7. Best Practices for Future Prevention:

   • Regularly check and clean your repository list to avoid using outdated or non-existent sources.
   • Keep your software updated to minimize compatibility issues with newer versions of tools like SDKManager.

If multiple users have reported success after removing the Etcher repository entry from their configuration files, this approach should be highlighted as a recommended solution.

Additionally, unresolved aspects of this issue may require further investigation into how SDKManager is programmed to handle missing packages and whether future updates will address this dependency on non-existent repositories.