Jetson Orin Nano Developer Kit Installation Failure with SDK Manager

Issue Overview

Users are experiencing difficulties when attempting to set up the Jetson Orin Nano Developer Kit 8GB with JetPack 6.0 Developer Preview using the NVIDIA SDK Manager. The primary issue is an installation failure during the flashing process of the SD card or NVME SSD. The error message displayed is "DateTime Target Setup – target: Depends on failed component." While the operating system appears to be installed, the setup process fails to complete successfully.

Some users have also reported issues when trying to flash the SD card directly, resulting in the device shutting down after displaying the message "The L4TLauncher: Attempting Direct Boot". This problem seems to occur across different versions of the SDK Manager (both 2.0 and 2.1).

Possible Causes

1. WSL2 Connection Issues: The use of Windows Subsystem for Linux 2 (WSL2) for flashing may cause connectivity problems due to the need for manual USB device reattachment after disconnections.

2. USB Connection Problems: Faulty or incompatible USB cables might lead to intermittent connections during the flashing process.

3. SDK Manager Compatibility: There could be compatibility issues between the SDK Manager and the Jetson Orin Nano Developer Kit, especially with the Developer Preview version of JetPack 6.0.

4. Hardware-specific Issues: Some users have reported success with previous installations, suggesting that hardware-specific problems or changes in the flashing process might be contributing factors.

5. Developer Preview Limitations: As a pre-release version, JetPack 6.0 Developer Preview may have inherent bugs or incomplete functionality that affects the installation process.

Troubleshooting Steps, Solutions & Fixes

1. Use a Native Ubuntu Environment:

   • The most reliable solution is to use a native Ubuntu PC for flashing the Jetson Orin Nano.
   • This eliminates potential WSL2-related issues and ensures full compatibility with the SDK Manager.

2. Check and Replace USB Connections:

   • Verify that the device is properly connected during the flashing process.
   • Try using different USB cables to rule out connection issues.
   • For WSL2 users, ensure the device is correctly attached to WSL:

     usbipd attach --wsl --busid x-x
     

   • Verify device visibility in WSL with:

     lsusb
     

3. Update SDK Manager:

   • Ensure you are using the latest version of the NVIDIA SDK Manager.
   • If issues persist, try an older version that has worked previously for other users.

4. Alternative Flashing Methods:

   • If SDK Manager continues to fail, consider using the direct SD card flashing method:
     • Download the SD Card Image of JetPack 6.0 from the NVIDIA Developer website.
     • Use a reliable SD card flashing tool to write the image to the card.
   • Be aware that this method may lead to the "Attempting Direct Boot" issue, which might require additional troubleshooting.

5. Post-Installation Troubleshooting:

   • After successful flashing, be prepared to address potential issues with drivers, Wi-Fi, Bluetooth, and other functionalities.
   • These problems may be related to the Developer Preview status of JetPack 6.0 and might require individual resolution or waiting for official updates.

6. Monitor and Reattach USB Devices (WSL2 Users):

   • During the installation process, the device may disconnect and reconnect multiple times.
   • WSL2 users should be prepared to manually reattach the device to WSL after each disconnection:

     usbipd attach --wsl --busid x-x
     

7. Consult Official Documentation and Forums:

   • Regularly check the NVIDIA Developer forums and official documentation for updates on known issues and potential fixes.
   • Consider reporting your specific problem to NVIDIA support if it persists after trying these solutions.

8. Wait for Stable Release:

   • If possible, consider waiting for the stable release of JetPack 6.0, which may resolve many of the issues encountered with the Developer Preview version.

By following these steps and considering the potential causes, users should be able to successfully install and set up their Jetson Orin Nano Developer Kit. If problems persist, it’s recommended to use a native Ubuntu environment for the most reliable results.