Jetpack 5.1.3 Installation Failure on Jetson Orin Nano 8GB DevKit

Issue Overview

Users are experiencing installation failures when attempting to flash Jetpack 5.1.3 on the Jetson Orin Nano 8GB DevKit using a 32GB SD card. The installation process fails at 88% completion, presenting multiple error messages. These errors include issues with TSC locking adjustment configuration, carveout support, and flash-related problems. The problem persists even when using a 64GB SD card.

Key details:

• Host OS: Ubuntu 20.04
• Target Device: Jetson Orin Nano 8GB DevKit
• Jetpack Version: 5.1.3
• Installation Method: SD card flashing

During the flashing process, users observe repeated disconnection and reconnection of the NVIDIA USB Device (APX).

Possible Causes

1. Insufficient SD Card Capacity: The initial 32GB SD card may not have enough space for the full Jetpack installation.

2. SD Card Compatibility Issues: Some SD cards may not be fully compatible with the flashing process or may have performance issues.

3. USB Connection Instability: The repeated disconnection and reconnection of the NVIDIA USB Device could indicate USB interface problems or power delivery issues.

4. Outdated or Corrupted Flashing Tools: The flash.sh script or other components of the Linux for Tegra (L4T) package may be outdated or corrupted.

5. Host System Configuration: Certain settings or software on the host Ubuntu system might interfere with the flashing process.

6. Hardware Issues: There could be potential hardware problems with the Jetson Orin Nano DevKit itself.

Troubleshooting Steps, Solutions & Fixes

1. Use a Larger SD Card:

   • Ensure the SD card is at least 57GB when calculated in 1024-byte units.
   • Format the SD card with a suitable file system (e.g., FAT32 for the boot partition, ext4 for the main partition).

2. Verify SD Card Integrity:

   • Check the SD card’s health using tools like fsck or badblocks.
   • Try a different, known-good SD card if available.

3. Use Internal Storage Instead of SD Card:

   • Execute the following command to flash directly to internal storage:

     sudo ./flash.sh jetson-orin-nano-devkit internal
     

   This method has been reported successful by users experiencing SD card-related issues.

4. Check USB Connection:

   • Use a high-quality USB cable.
   • Try different USB ports on the host computer.
   • Ensure stable power delivery to both the host computer and the Jetson device.

5. Update Flashing Tools:

   • Download the latest version of the L4T package from the NVIDIA Developer website.
   • Ensure all dependencies are installed on the host system:

     sudo apt update
     sudo apt install qemu-user-static
     

6. Verify Host System Compatibility:

   • Ensure the host Ubuntu 20.04 system is up-to-date:

     sudo apt update
     sudo apt upgrade
     

   • Check for any conflicting software or services that might interfere with the flashing process.

7. Examine Detailed Logs:

   • Review the full installation logs for specific error messages or patterns.
   • Look for recurring errors or warnings that might provide clues about the root cause.

8. Reset the Jetson Device:

   • Power cycle the Jetson Orin Nano DevKit.
   • Enter recovery mode by holding the recovery button while powering on the device.

9. Check Hardware Connections:

   • Ensure all cables and connections to the Jetson device are secure.
   • Inspect for any visible damage to the device or its ports.

10. Consult NVIDIA Developer Forums:

    • If the issue persists, consider posting detailed logs and system information on the NVIDIA Developer Forums for expert assistance.

By following these steps systematically, users should be able to resolve the Jetpack 5.1.3 installation issues on their Jetson Orin Nano 8GB DevKit. If problems persist after trying these solutions, it may be necessary to contact NVIDIA support directly or consider the possibility of hardware defects.