How to Remove the NVIDIA Logo in Orin Nano JetPack-6

Issue Overview

Users are experiencing difficulty in changing the default NVIDIA logo that appears during boot on the Jetson Orin Nano 8GB Developer Kit running JetPack 6. The main symptoms include:

• The persistent display of the NVIDIA logo during system boot, which users wish to replace with a custom logo.
• The issue arises specifically during the boot process of the device.
• Users have mentioned running JetPack version 6.0, with an interest in knowing if similar steps apply to JetPack version 5.1.3.

The frequency of this issue appears to be consistent among users who want to customize their boot experience, impacting user experience by limiting personalization options.

Possible Causes

Several potential causes for this issue can be identified:

• Configuration Errors: Users may not be aware of the correct procedure to modify the boot logo, leading to unsuccessful attempts.

• Documentation Gaps: Lack of clear instructions in the available documentation could result in confusion regarding the process.

• Software Version Differences: Although users are interested in both JetPack 6 and 5.1.3, there may be subtle differences in how each version handles boot configurations.

Troubleshooting Steps, Solutions & Fixes

To address the issue of changing the NVIDIA logo during boot, users can follow these steps:

1. Consult Documentation:

   • Refer to the official NVIDIA documentation for guidance on customizing the boot logo. The relevant section can be found here: NVIDIA Developer Guide. This document outlines the necessary steps for both JetPack 6.0 and 5.1.3.

2. Prepare Custom Logo:

   • Ensure that your custom logo meets any specified requirements (size, format) as outlined in the documentation.

3. Modify Boot Configuration:

   • Follow these general steps based on the documentation:
     • Access the UEFI settings or bootloader configuration.
     • Locate the section where the default logo is specified.
     • Replace the default NVIDIA logo with your custom logo by updating the relevant configuration files.

4. Test Changes:

   • After making the changes, reboot your device to verify that your custom logo appears during startup.

5. Revert Changes if Necessary:

   • If issues arise after customization, revert to the original configuration using backup files or by following instructions in the documentation.

6. Seek Community Assistance:

   • If problems persist or further clarification is needed, consider reaching out on forums or communities dedicated to NVIDIA Jetson products for additional support.

7. Best Practices:

   • Always back up original configuration files before making any changes.
   • Keep your JetPack installation updated to avoid compatibility issues with future modifications.

By following these steps and utilizing available resources, users should be able to successfully customize their boot logo on the Jetson Orin Nano Dev board running JetPack 6 or 5.1.3.