How to Flash Jetson Orin Nano Linux Image

Issue Overview

Users are experiencing difficulty flashing the JetPack Linux image onto the Nvidia Jetson Orin Nano 4GB module. The specific problem is that the SDK Manager does not display the "Jetson Orin Nano" image option, preventing users from installing JetPack on their newly acquired hardware. This issue occurs during the initial setup process and significantly impacts the user’s ability to get started with their Jetson Orin Nano development board.

Possible Causes

1. Outdated SDK Manager: The most likely cause of this issue is an outdated version of the NVIDIA SDK Manager. Older versions may not include support for the latest Jetson hardware, such as the Orin Nano.

2. Incompatible SDK Manager Version: Some versions of the SDK Manager might have compatibility issues with specific Jetson hardware models, leading to missing image options.

3. Incomplete Hardware Support: In rare cases, there might be a delay in adding support for new hardware to the SDK Manager, especially if the Jetson Orin Nano is a very recent release.

Troubleshooting Steps, Solutions & Fixes

1. Update SDK Manager:

   • Download and install the latest version of the NVIDIA SDK Manager from the official NVIDIA Developer website.
   • After installation, launch the updated SDK Manager and check if the "Jetson Orin Nano" image option is now available.

2. Verify Hardware Connection:

   • Ensure that your Jetson Orin Nano is properly connected to your host computer.
   • Check all cable connections and try using different USB ports if necessary.

3. Restart SDK Manager:

   • Close the SDK Manager completely.
   • Reopen the application and attempt to flash the image again.

4. Check for System Updates:

   • Ensure your host computer’s operating system is up to date.
   • Install any pending system updates that might affect driver compatibility.

5. Consult Official Documentation:

   • Visit the NVIDIA Developer website for the latest documentation on Jetson Orin Nano setup.
   • Look for any known issues or special instructions specific to your hardware model.

6. Contact NVIDIA Support:

   • If the issue persists after trying the above steps, reach out to NVIDIA’s official support channels for further assistance.

By following these steps, users should be able to resolve the issue and successfully flash the JetPack Linux image onto their Jetson Orin Nano 4GB module. The most effective solution, as confirmed by the original poster, is updating to the latest version of the SDK Manager.