Do you know the model number of the MIPI camera connector cover for Jetson Orin Nano?

Issue Overview

Users are experiencing issues with the MIPI camera connector cover on the Nvidia Jetson Orin Nano Dev board, specifically related to damage sustained by the connector. The main symptom reported is the need to replace this damaged component, as it affects the ability to connect a MIPI camera properly.

The problem occurs when users attempt to use a MIPI camera with their Jetson Orin Nano, and they find that the existing connector cover is either broken or missing. The discussion highlights a specific request for assistance in identifying the model number of the replacement cover.

The hardware in question is the Nvidia Jetson Orin Nano Dev board, which features a 22-position MIPI camera connector with a pitch of 0.5 mm. The frequency of this issue appears to be limited to individual cases, primarily affecting users who have experienced physical damage to their devices. The impact on user experience is significant, as without a functional connector cover, users cannot effectively utilize MIPI camera functionalities.

Possible Causes

• Hardware Damage: The primary cause of this issue is physical damage to the MIPI camera connector cover, which can occur due to mishandling or accidental impacts.

• Incompatibility: If users attempt to use connectors that do not match the specifications required by the Jetson Orin Nano, it may lead to improper fit or functionality.

• User Errors: Users may inadvertently apply excessive force when connecting or disconnecting devices, leading to damage.

Troubleshooting Steps, Solutions & Fixes

1. Identify Damage:

   • Inspect the MIPI camera connector visually for any signs of physical damage.
   • Check if any pins are bent or if there are cracks in the plastic housing.

2. Model Number Verification:

   • The model number for the replacement MIPI camera connector cover is Molex 54548-2272. This part can be ordered from various electronic component suppliers.

3. Purchase Replacement:

   • Search for the Molex 54548-2272 part number on electronic component websites or contact local distributors for availability.

4. Installation Instructions:

   • Once you receive the replacement cover, carefully align it with the existing connector.
   • Ensure that no pins are obstructed and that it fits snugly into place without forcing it.

5. Testing:

   • After installation, connect your MIPI camera and test its functionality by running sample applications provided with the Jetson Orin Nano SDK.

6. Best Practices for Future Prevention:

   • Handle connectors with care during installation and removal.
   • Use appropriate tools designed for electronics work to minimize physical stress on connectors.

7. Documentation and Support:

   • Refer to Nvidia’s official documentation for additional guidance on connecting peripherals and troubleshooting hardware issues.
   • Consider joining forums or communities focused on Nvidia Jetson products for shared experiences and solutions.

If issues persist after replacing the connector cover, further investigation into other hardware components or configurations may be necessary.