Jetson Orin Nano Dev Board Flashing Errors

Issue Overview

Users are experiencing a series of errors while attempting to install Jetson Software on the Nvidia Jetson Orin Nano Developer Kit using the SDK Manager. The main symptoms include:

• Error Messages: Users report multiple error messages during the flashing process, such as:

  • "ERROR: Flash Jetson Linux – flash 52057 blocks"
  • "ERROR: failed to read rcm_state"
  • "ERROR: value0x31 is out of range"
  • "ERROR: No such file or directory"

• Context: These errors occur during the installation phase of Jetson Linux, specifically when trying to flash the operating system onto the device.

• Hardware/Software Specifications: The users are utilizing a host PC running Ubuntu 20.04 and are attempting to flash the OS onto an NVMe drive.

• Frequency: The issue appears to be consistent among multiple users attempting similar setups.

• Impact: The inability to successfully flash the operating system severely hampers the functionality of the Jetson Orin Nano, preventing users from utilizing their development kits effectively.

Possible Causes

Several potential causes for these issues have been identified:

• Hardware Incompatibilities or Defects: The NVMe drive may not be compatible with the Jetson Orin Nano or could be defective, leading to read/write errors.

• Software Bugs or Conflicts: There may be bugs in the SDK Manager or conflicts with other software components that hinder successful flashing.

• Configuration Errors: Incorrect configurations during the setup process could lead to failures in detecting hardware components.

• Driver Issues: Outdated or missing drivers for the NVMe drive or related hardware may cause detection problems.

• Environmental Factors: Power supply issues or overheating could affect performance and lead to installation failures.

• User Errors or Misconfigurations: Users may not have correctly set up their environment, leading to issues during installation.

Troubleshooting Steps, Solutions & Fixes

To resolve these issues, users can follow these comprehensive troubleshooting steps:

1. Check Hardware Connections:

   • Ensure that the NVMe drive is securely connected. Disconnect and reconnect it to ensure proper seating.
   • Refer to video tutorials on how to install SSDs in the Jetson Orin Nano for guidance.

2. Format the NVMe Drive:

   • Before attempting to flash again, format the NVMe drive using a compatible file system (e.g., ext4).

3. Test with Alternative Hardware:

   • If possible, try using a different NVMe drive to rule out hardware failure.
   • Alternatively, consider using a USB drive for flashing if issues persist with the NVMe drive.

4. Use SDK Manager Export Feature:

   • Utilize the export feature in SDK Manager to generate a complete log file. This can provide more detailed information about what went wrong during installation.

5. Update Drivers and Software:

   • Ensure that all drivers related to NVMe and Jetson devices are up-to-date.
   • Check for updates for SDK Manager and JetPack software.

6. Run Diagnostic Commands:

   • Use terminal commands to gather information about connected devices:

     lsblk
     dmesg | grep nvme
     

   • These commands can help confirm whether the system recognizes the NVMe drive.

7. Review Log Files:

   • Analyze log files generated during installation for specific error messages that can guide further troubleshooting efforts.

8. Follow Best Practices:

   • Always ensure that your development environment meets all specified requirements before starting installations.
   • Regularly back up important data and configurations prior to making significant changes or updates.

9. Seek Further Assistance:

   • If issues remain unresolved after following these steps, consider reaching out on forums or Nvidia support channels with detailed logs and descriptions of your attempts.

By following these steps, users should be able to diagnose and potentially resolve the flashing errors encountered with their Nvidia Jetson Orin Nano Developer Kit.